Shop
Home » Products
Miller® | Smith Equipment® provides heating, cutting & welding tips to cover all your possible needs. If you want to learn why you should choose them, visit this section about heating, cutting & welding tips, where all the features of our tips are explained in detail.
Miller® | Smith Equipment® tips are 100-percent tested and inspected and are the longest lasting tips you can buy. See all the Cutting Tips.
Our “soft flame” welding tips are 100-percent tested and inspected, and make welding easier. See all the Welding Tips.
Miller® | Smith Equipment® heating tips used in torch handles provide significant cost savings in many applications. See all the Heating Tips.
-
- Specialty Tips
14711 Quickbraze™ Multi-Flame Tip, 13760 BTU
- The 14711 Quickbraze™ Multi-Flame Tip, 13760 BTU is recommended for brazing copper pipe 1/2" - 1-5/8" (12.7 mm - 41.2…
- Read more
-
- Specialty Tips
16586 Quickbraze™ Single Flame Tip, 7360 BTU
- The 16586 Quickbraze™ Single Flame Tip, 7360 BTU is recommended for brazing copper pipe 1/2" - 3/4" (12 mm -…
- Read more
-
- Specialty Tips
A3 Versa-Torch™ Screw On Tip Head
- The A3 Versa-Torch™ Screw On Tip Head is thread on the end of AT400 Flexible Twin Flame Tip for brazing,…
- Read more
-
- Standard Duty Heating Tips, Standard Duty Welding Tips
AT60 Heating/Brazing Acetylene Tip with Threaded Tip Tube
- The AT60 is a Heating/Brazing Acetylene Tip with Threaded Tip Tube to be used as part of Versa-Torch Brazing/Soldering Tip…
- Read more
-
- Standard Duty Heating Tips
AT605 Standard-Duty Heating Tip
- The AT605 Standard-Duty Heating Tip is a handy light-duty multi-flame tip for heating, brazing, and applying hard-facing metals.
- Read more
-
- Standard Duty Heating Tips, Standard Duty Welding Tips
AT61 Heating/Brazing LP Tip with Threaded Tip Tube
- The AT61 Heating/Brazing LP Tip with Threaded Tip Tube to be used as part of Versa-Torch Brazing/Soldering Tip Selection.
- Read more
-
- Standard Duty Welding Tips
AW201 Standard-Duty Welding/Brazing Tip
- These AW201 Standard-Duty Welding/Brazing Tips are for general purposes. Shorter, lighter, and easier to handle.
- Read more
-
- Standard Duty Welding Tips
AW203 Standard-Duty Welding/Brazing Tip
- These AW203 Standard-Duty Welding/Brazing Tips are for general purposes. Shorter, lighter, and easier to handle.
- Read more
-
- Standard Duty Welding Tips
AW205 Standard-Duty Welding/Brazing Tip
- These AW205 Standard-Duty Welding/Brazing Tips are for general purposes. Shorter, lighter, and easier to handle.
- Read more
-
- Standard Duty Welding Tips
AW207 Standard-Duty Welding/Brazing Tip
- These AW207 Standard-Duty Welding/Brazing Tips are for general purposes. Shorter, lighter, and easier to handle.
- Read more
-
- Standard Duty Welding Tips
AW209 Standard-Duty Welding/Brazing Tip
- These AW209 Standard-Duty Welding/Brazing Tips are for general purposes. Shorter, lighter, and easier to handle.
- Read more
-
- Standard Duty Welding Tips
AW210 Standard-Duty Welding/Brazing Tip
- These AW210 Standard-Duty Welding/Brazing Tips are for general purposes. Shorter, lighter, and easier to handle.
- Read more
-
- Specialty Tips
C2 Quickbraze™ C Style Tip, 12350 BTU
- The C2 Quickbraze™ C Style Tip, 12350 BTU is a revolutionary patented "C" style tip provide 100% flame wrap for…
- Read more
-
- Specialty Tips, Versa-Torch™
LT103 Versa-Torch™ Screw On Tip Head, Drill Size 63
- The LT103 Versa-Torch™ Screw On Tip Head, Drill Size 63 provides versatility in tip end selection depending on flame desired.
- Read more
-
- Specialty Tips, Versa-Torch™
LT104 Versa-Torch™ Screw On Tip Head, Drill Size 56
- The LT104 Versa-Torch™ Screw On Tip Head, Drill Size 56 provides versatility in tip end selection depending on flame desired.
- Read more
-
- Specialty Tips, Versa-Torch™
LT106 Versa-Torch™ Screw On Tip Head, Drill Size 52
- The LT106 Versa-Torch™ Screw On Tip Head, Drill Size 52 provides versatility in tip end selection depending on flame desired.
- Read more
-
- Medium Duty Cutting Tips
MC12-0 Medium-Duty Cutting Tip
- The MC12-00 Medium/Standard Duty is a slip-in cutting tip for general medium and standard duty hand cutting, depending on the…
- Read more
-
- Medium Duty Cutting Tips
MC12-00 Medium-Duty Cutting Tip
- The MC12-00 Medium/Standard Duty is a slip-in cutting tip for general medium and standard duty hand cutting, depending on the…
- Read more
-
- Medium Duty Cutting Tips
MC12-1 Medium-Duty Cutting Tip
- The MC12-1 Medium/Standard Duty is a slip-in cutting tip for general medium and standard duty hand cutting, depending on the…
- Read more
-
- Medium Duty Cutting Tips
MC12-2 Medium-Duty Cutting Tip
- The MC12-2 Medium/Standard Duty is a slip-in cutting tip for general medium and standard duty hand cutting, depending on the…
- Read more
-
- Medium Duty Cutting Tips
MC12-3 Medium-Duty Cutting Tip
- The MC12-3 Medium/Standard Duty is a slip-in cutting tip for general medium and standard duty hand cutting, depending on the…
- Read more
-
- Medium Duty Cutting Tips
MC12-4 Medium-Duty Cutting Tip
- The MC12-4 Medium/Standard Duty is a slip-in cutting tip for general medium and standard duty hand cutting, depending on the…
- Read more
-
- Medium Duty Cutting Tips
MC12-5 Medium-Duty Cutting Tip
- The MC12-5 Medium/Standard Duty is a slip-in cutting tip for general medium and standard duty hand cutting, depending on the…
- Read more
-
- Medium Duty Cutting Tips
MC13-3 Medium/Standard Duty Gouging Tip
- The MC13-3 Medium/Standard Duty Gouging Tip is intended for edge preparation, removal of old welds or defects in steel. Heavy…
- Read more
-
- Medium Duty Cutting Tips
MC40-0 Medium/Standard Duty Cutting Tip
- The MC40-0 is a two-piece medium preheat medium/standard duty cutting tip for hand cutting with propane and propane-based fuel gases,…
- Read more
-
- Medium Duty Cutting Tips
MC40-00 Medium/Standard Duty Cutting Tip
- The MC40-00 is a two-piece medium preheat medium/standard duty cutting tip for hand cutting with propane and propane-based fuel gases,…
- Read more
-
- Medium Duty Cutting Tips
MC40-1 Medium/Standard Duty Cutting Tip
- The MC40-1 is a two-piece medium preheat medium/standard duty cutting tip for hand cutting with propane and propane-based fuel gases,…
- Read more
-
- Medium Duty Cutting Tips
MC40-2 Medium/Standard Duty Cutting Tip
- The MC40-2 is a two-piece medium preheat medium/standard duty cutting tip for hand cutting with propane and propane-based fuel gases,…
- Read more
-
- Medium Duty Cutting Tips
MC40-3 Medium/Standard Duty Cutting Tip
- The MC40-3 is a two-piece medium preheat medium/standard duty cutting tip for hand cutting with propane and propane-based fuel gases,…
- Read more
-
- Medium Duty Cutting Tips
MC40-4 Medium/Standard Duty Cutting Tip
- The MC40-4 is a two-piece medium preheat medium/standard duty cutting tip for hand cutting with propane and propane-based fuel gases,…
- Read more
-
- Medium Duty Cutting Tips
MC60-1 Medium/Standard Duty Cutting Tip
- The MC60-1 is a two-piece medium preheat cutting tip for hand cutting with propylene or propylene-based fuel gases, depending on…
- Read more
-
- Medium Duty Cutting Tips
MC60-2 Medium/Standard Duty Cutting Tip
- The MC60-2 is a two-piece medium preheat cutting tip for hand cutting with propylene or propylene-based fuel gases, depending on…
- Read more
-
- Medium Duty Cutting Tips
MC60-3 Medium/Standard Duty Cutting Tip
- The MC60-3 is a two-piece medium preheat cutting tip for hand cutting with propylene or propylene-based fuel gases, depending on…
- Read more
-
- Medium Duty Cutting Tips
MC60-4 Medium/Standard Duty Cutting Tip
- The MC60-4 is a two-piece medium preheat cutting tip for hand cutting with propylene or propylene-based fuel gases, depending on…
- Read more
-
- Medium Duty Heating Tips
MT603 Medium-Duty Heating Tip
- The MT603 Medium-Duty Heating Tip are versatile multi-flame heating tips for the popular medium-duty torch handles. Used for general heating…
- Read more
-
- Medium Duty Heating Tips
MT605 Medium-Duty Heating Tip
- The MT605 Medium-Duty Heating Tip are versatile multi-flame heating tips for the popular medium-duty torch handles. Used for general heating…
- Read more
-
- Medium Duty Heating Tips
MT610 Medium-Duty Heating Tip
- The MT610 Medium-Duty Heating Tip are versatile multi-flame heating tips for the popular medium-duty torch handles. Used for general heating…
- Read more
-
- Medium Duty Heating Tips
MT615 Medium-Duty Heating Tip
- The MT615 Medium-Duty Heating Tip provides high heating performance with low-cost fuel gases including natural gas and propane-based gases.
- Read more
-
- Medium Duty Heating Tips
MT805 Medium-Duty Heating Tip
- The MT805 Medium-Duty Heating Tip provides high heating performance with low-cost fuel gases including natural gas and propane-based gases.
- Read more
-
- Medium Duty Welding Tips
MW201 Medium-Duty Welding Tip
- The MW201 Medium-Duty Welding Tip is for general purpose medium-duty welding which features our “soft flame” for easier puddle control…
- Read more
-
- Medium Duty Welding Tips
MW203 Medium-Duty Welding Tip
- The MW203 Medium-Duty Welding Tip is for general purpose medium-duty welding which features our “soft flame” for easier puddle control…
- Read more
-
- Medium Duty Welding Tips
MW205 Medium-Duty Welding Tip
- The MW205 Medium-Duty Welding Tip is for general purpose medium-duty welding which features our “soft flame” for easier puddle control…
- Read more
-
- Medium Duty Welding Tips
MW207 Medium-Duty Welding Tip
- The MW207 Medium-Duty Welding Tip is for general purpose medium-duty welding which features our “soft flame” for easier puddle control…
- Read more
-
- Medium Duty Welding Tips
MW209 Medium-Duty Welding Tip
- The MW209 Medium-Duty Welding Tip is for general purpose medium-duty welding which features our “soft flame” for easier puddle control…
- Read more
-
- Medium Duty Welding Tips
MW411 Medium-Duty Brazing Tip
- This MW411 Medium-Duty Brazing Tip is a general-purpose medium-duty brazing tip designed specifically for use with propane or propane-based mixture…
- Read more
-
- Specialty Tips, Versa-Torch™
NE154 Versa-Torch™ Screw On Tip Head, Drill Size 36
- The NE154 Versa-Torch™ Screw On Tip Head, Drill Size 36 provides versatility in tip end selection depending on flame desired.
- Read more
-
- Specialty Tips
SC112 Heavy-Duty Special-Purpose Heating Tip
- The SC112 Heavy-Duty Special-Purpose Heating Tip provides lots of heat fast with economical LP gas and oxygen. It is not…
- Read more
-
- Heavy Duty Cutting Tips
SC12-0 Heavy-Duty Cutting Tip
- The SC12-0 Heavy-Duty Cutting Tip is a preheat cutting tip for general hand and machine cutting. These Heavy-Duty Cutting Tips…
- Read more
-
- Heavy Duty Cutting Tips
SC12-00 Heavy-Duty Cutting Tip
- The SC12-00 Heavy-Duty Cutting Tip is a preheat cutting tip for general hand and machine cutting. These Heavy-Duty Cutting Tips…
- Read more
-
- Heavy Duty Cutting Tips
SC12-1 Heavy-Duty Cutting Tip
- The SC12-1 Heavy-Duty Cutting Tip is a preheat cutting tip for general hand and machine cutting. These Heavy-Duty Cutting Tips…
- Read more
-
- Heavy Duty Cutting Tips
SC12-2 Heavy-Duty Cutting Tip
- The SC12-2 Heavy-Duty Cutting Tip is a preheat cutting tip for general hand and machine cutting. These Heavy-Duty Cutting Tips…
- Read more
-
- Heavy Duty Cutting Tips
SC12-3 Heavy-Duty Cutting Tip
- The SC12-3 Heavy-Duty Cutting Tip is a preheat cutting tip for general hand and machine cutting. These Heavy-Duty Cutting Tips…
- Read more
-
- Heavy Duty Cutting Tips
SC12-4 Heavy-Duty Cutting Tip
- The SC12-4 Heavy-Duty Cutting Tip is a preheat cutting tip for general hand and machine cutting. These Heavy-Duty Cutting Tips…
- Read more
-
- Heavy Duty Cutting Tips, Specialty Tips
SC12-4×9 Heavy-Duty Extra Long Cutting Tip
- The SC12-4x9 Heavy-Duty Extra Long Cutting Tip is a tip designed for hard-to-reach areas.
- Read more
-
- Heavy Duty Cutting Tips
SC12-5 Heavy-Duty Cutting Tip
- The SC12-5 Heavy-Duty Cutting Tip is a preheat cutting tip for general hand and machine cutting. These Heavy-Duty Cutting Tips…
- Read more
-
- Heavy Duty Cutting Tips
SC12-6 Heavy-Duty Cutting Tip
- The SC12-6 Heavy-Duty Cutting Tip is a preheat cutting tip for general hand and machine cutting. These Heavy-Duty Cutting Tips…
- Read more
-
- Heavy Duty Cutting Tips, Specialty Tips
SC13-3 Heavy-Duty Gouging Tip
- The SC13-3 Heavy-Duty Gouging Tip is a tip designed for edge preparation, removal of welds, or gouging cracked metals.
- Read more
-
- Heavy Duty Cutting Tips, Specialty Tips
SC13-5 Heavy-Duty Gouging Tip
- The SC13-5 Heavy-Duty Gouging Tip is a tip designed for edge preparation, removal of welds, or gouging cracked metals.
- Read more
-
- Heavy Duty Cutting Tips, Specialty Tips
SC14-3 Rivet/Riser Cutting Tip
- The SC14-3 Rivet/Riser Cutting Tip cuts heads of bolts and rivets. It can also be used in a 180-degree head-cutting…
- Read more
-
- Heavy Duty Cutting Tips, Specialty Tips
SC2-2 Heavy-Duty Gouging Tip, Propane
- The SC2-2 Heavy-Duty Gouging Tip, Propane is ideal for removing old welds or cracks, veeing and groove cutting.
- Read more
-
- Heavy Duty Cutting Tips, Specialty Tips
SC2-4 Heavy-Duty Gouging Tip, Propane
- The SC2-4 Heavy-Duty Gouging Tip, Propane is ideal for removing old welds or cracks, veeing, and groove cutting.
- Read more
-
- Heavy Duty Cutting Tips, Specialty Tips
SC23-3 Heavy-Duty Gouging Tip, Propane
- The SC23-3 Heavy-Duty Gouging Tip, Propane is ideal for removing old welds or cracks, veeing, and groove cutting.
- Read more
-
- Heavy Duty Cutting Tips, Specialty Tips
SC23-3M Heavy-Duty Gouging Tip, Propylene
- The SC23-3M Heavy-Duty Gouging Tip, Propylene is ideal for removing old welds or cracks, veeing, and groove cutting.
- Read more
-
- Heavy Duty Cutting Tips
SC40-0 Heavy-Duty Cutting Tip
- The SC40-0 Heavy-Duty Cutting Tip is a two-piece medium preheat cutting tips for general hand and machine cutting with propane,…
- Read more
-
- Heavy Duty Cutting Tips
SC40-1 Heavy-Duty Cutting Tip
- The SC40-1 Heavy-Duty Cutting Tip is a two-piece medium preheat cutting tips for general hand and machine cutting with propane,…
- Read more
-
- Heavy Duty Cutting Tips
SC40-2 Heavy-Duty Cutting Tip
- The SC40-2 Heavy-Duty Cutting Tip is a two-piece medium preheat cutting tips for general hand and machine cutting with propane,…
- Read more
-
- Heavy Duty Cutting Tips
SC40-3 Heavy-Duty Cutting Tip
- The SC40-3 Heavy-Duty Cutting Tip is a two-piece medium preheat cutting tips for general hand and machine cutting with propane,…
- Read more
-
- Heavy Duty Cutting Tips
SC40-4 Heavy-Duty Cutting Tip
- The SC40-4 Heavy-Duty Cutting Tip is a two-piece medium preheat cutting tips for general hand and machine cutting with propane,…
- Read more
-
- Heavy Duty Cutting Tips
SC46-2 Heavy-Duty Cutting Tip
- The SC46-2 Heavy-Duty Cutting Tip is a one-piece cutting tip designed for cutting dirty or heavily coated metals. For rugged…
- Read more
-
- Heavy Duty Cutting Tips
SC46-4 Heavy-Duty Cutting Tip
- The SC46-4 Heavy-Duty Cutting Tip is a one-piece cutting tip designed for cutting dirty or heavily coated metals. For rugged…
- Read more
-
- Heavy Duty Cutting Tips
SC46-5 Heavy-Duty Cutting Tip
- The SC46-5 Heavy-Duty Cutting Tip is a one-piece cutting tip designed for cutting dirty or heavily coated metals. For rugged…
- Read more
-
- Heavy Duty Cutting Tips
SC46-6 Heavy-Duty Cutting Tip
- The SC46-6 Heavy-Duty Cutting Tip is a one-piece cutting tip designed for cutting dirty or heavily coated metals. For rugged…
- Read more