Series MW200

The Series  MW200 is for general purpose medium-duty welding which features our “soft flame” for easier puddle control and better penetration. Tips are bent to 63.5-degree angle. O-ring replacement: MW15 (package of 25).

Fuel gases for the MW200 Series

These tips may also be used for brazing with acetylene-based fuels and propylene-based fuel gases. When using these gases, select a tip two sizes larger than recommended for the same work as acetylene.

*Consumption (SCFH: cubic feet per hour) figures represent the average volumes of gases consumed when acetylene is added until sooty smoke just disappears from the acetylene flame prior to opening the oxygen valve and adjusting to a neutral flame.

Compatible torch handles for the MW200 Series

  • WH100
  • MW5A
  • CW5A
Tip
Number
Welding Capacity
Inches (mm)
Consumption (SCFH)
Oxygen
Consumption (SCFH)
Acetylene
Drill Size
MW2011/32 (0.7)2.32.371
MW2035/64 (1.9)3.23.267
MW2051/8 (3)6657
MW2073/16 (5)121254
MW2093/8 (10)232349
Tip number MW201
Welding Capacity Inches (mm)1/32 (0.7)
Consumption (SCFH) Oxygen2.3
Consumption (SCFH) Acetylene2.3
Drill Size71
Tip number MW203
Welding Capacity Inches (mm)5/64 (1.9)
Consumption (SCFH) Oxygen3.2
Consumption (SCFH) Acetylene3.2
Drill Size67
Tip number MW205
Welding Capacity Inches (mm)1/8 (3)
Consumption (SCFH) Oxygen6
Consumption (SCFH) Acetylene6
Drill Size57
Tip number MW207
Welding Capacity Inches (mm)3/16 (5)
Consumption (SCFH) Oxygen12
Consumption (SCFH) Acetylene12
Drill Size54
Tip number MW209
Welding Capacity Inches (mm)3/8 (10)
Consumption (SCFH) Oxygen23
Consumption (SCFH) Acetylene23
Drill Size49