SKU AW205 Category Standard Duty Welding Tips Series Acetylene, Brazing, Oxygen, Series AW200, Standard-Duty, Welding

AW205 Standard-Duty Welding/Brazing Tip

These AW205 Standard-Duty Welding/Brazing Tips are for general purposes. Shorter, lighter, and easier to handle.

Ask for more information

AW205 Standard-Duty Welding/Brazing Tip

These AW205 Standard-Duty Welding/Brazing Tips are for general purposes. Shorter, lighter, and easier to handle.

SKU AW205 Category Standard Duty Welding Tips Applications Acetylene, Brazing, Oxygen, Series AW200, Standard-Duty, Welding

Ask for more information

About this product

These AW205 Standard-Duty Welding/Brazing Tips are for general purposes. Shorter, lighter, and easier to handle. O-ring replacement: AW15 (package of 25).

This welding tip is part of the AW200 Series. Authentic Miller® | Smith Equipment® tips are available in a wide variety of sizes and fuel gases for all of your heating, cutting, brazing, and welding needs.

Fuel gases for the AW205 Standard-Duty Welding/Brazing Tip

These tips may also be used for brazing with acetylene-based fuels and propylene-based fuel gases. When using these gases, select a tip two sizes larger than recommended for the same work as acetylene.

Compatible torch handles for the AW205 Standard-Duty Welding/Brazing Tip

AW1A
AW10A

Tip Number	Welding Capacity Inches (mm)	Consumption (SCFH) Oxygen	Consumption (SCFH) Acetylene	Drill Size
AW205	1/8 (3)	6	6	57

Tip number AW205
Welding Capacity Inches (mm)	1/8 (3)
Consumption (SCFH) Oxygen	6
Consumption (SCFH) Acetylene	6
Drill Size	57

*Consumption (SCFH: cubic feet per hour) figures represent the average volumes of gases consumed when acetylene is added until sooty smoke just disappears from the acetylene flame prior to opening the oxygen valve and adjusting to a neutral flame.

About the Miller® | Smith Equipment® Oxy-Fuel Welding Tips

Our “soft flame” welding tips are 100-percent tested and inspected, and make welding easier.

Our welding tips are quality engineered to provide easy handling, high performance, and added protection in welding, brazing, and soldering operations.

Each tip is individually tested on our automatic testing machines and must pass stringent requirements for flame characteristics, gas flow, and resistance to backfire or flashback.

Select from quality tips for dependable performance with acetylene, natural gas (city gas), propane, and propylene-based fuels.

Construction features of the Miller® | Smith Equipment® Oxy-Fuel Welding Tips

“Soft flame”

Our “soft flame” welding tips provide concentrated heat for better “puddle” control — the turbulent-free flame eliminates puddle chasing.

Soft flame provides deep, even penetration without burning through base metal for strong, dependable welds. Molten metal is protected from atmospheric oxidation by a smooth, even flame envelope.

Heavy-wall copper

Heavy-wall copper gives greater resistance to reflected heat, permits cooler operation, and dissipates more heat than thin-wall copper.

Heat-absorbing tips provide longer life, and the long straight-away design permits tip refacing after excessive wear or abuse.

Slip-in tip design — just hand tighten

Tips may be rotated 360 degrees for convenient positioning, eliminating hose resistance during operation. Slip-in tips can be changed in just seconds. Hand-tighten, no wrench needed.

O-rings provide a gas-tight seal keeping gases separate until they mix in the tip.

After the first tightening with a wrench, only hand tightening is required to seat the tip, saving time when changing tips. Quick and easy tip changes encourage the use of the right tip for the job.

Each tip is a precision-engineered mixer for combining preheat oxygen and fuel gas to attain maximum efficiency. Adds resistance to flashback. Learn more about the in-tip mix.

O-ring seals

O-rings provide a gas-tight seal with no metal seating surface to damage if dropped. Gases are kept separate until entering the mixing chamber.

Caution: Authentic Miller® | Smith Equipment® tips must be used. To qualify for warranty repair, Miller® | Smith Equipment® torches must be returned with a tip. Aftermarket tips are often the cause of poor performance or malfunction.

About the AW205 Standard-Duty Welding/Brazing Tip

See here the complete line of Oxy-Fuel Standard Duty Welding Tips.

Download here the warranty policy for all Oxy-Fuel and Pressure Regulation Equipment from Miller® | Smith Equipment®.

This AW205 Standard-Duty Welding/Brazing Tip is manufactured by Miller® | Smith Equipment ®. Ifexport is the Preferred International Authorized Miller® | Smith Equipment® Wholesaler.