Handi-Heet™

Handi-Heet™ soldering outfits provide fast heat with acetylene and atmospheric air. It is not sensitive to temperature changes.

Handi-Heet™ is an acetylene/air kit for heating, soldering, brazing, and sweating.

Acetylene/Air Handi-Heet™ Outfit

Handi-Heet™ soldering outfits provide fast heat with acetylene and atmospheric air. Concentrated soft flame delivers 4700 °F heat just where it is needed for maximum performance on all types of soldering, heating, thawing and other applications. No oxygen tank required.

The NE180A Torch

The tough NE180A torch handle is built to last – machined from solid brass. Unlike plastic torches, it is not sensitive to temperature changes.

Full length fluted handle provides firm comfortable grip. Needle valve provides excellent flame adjustment. Easy to operate, just hold torch and set flame with one hand.

Handi-Heet™ soldering tips have Miller® | Smith Equipment® famous Slip-in design. Seats perfectly by hand, no wrench needed. “O” ring provides tight gas seal and allows operator to rotate tip to any position.

All tips and torch body are nickel plated. Sturdy single stage regulator provides steady and sensitive gas regulation for maximum torch performance.

NOTE: Torch does not require check valves or flashback arrestors.

About the Acetylene/Air Torch & Tips Features

These acetylene/air torch & tips burns acetylene with atmospheric air. Ideal for sweating copper joints up to 6” (152 mm) in diameter, soldering, leading, thawing, heating and straightening.

Acetylene/Air Torch & Tips Features

  • No oxygen tank needed
  • Clean, economical heat
  • No wrench needed, tips are hand tightened
  • One-handed flame adjustment
  • 360° Tip turning radius
  • Tough all brass body
  • Smooth turning needle valve
  • Rugged tips
  • Nickel plated for added heat resistance
  • Fuel pressure setting: 12-14 PSIG
Outfit No.Torch HandleTipsRegulatorFits TanksAccessories
NE835ANE180ANE180-1
NE180-2
NE180-3
30-15-520
CGA 520
“B” 40 cu. ftRL121 12.5’ (3.8m) Hose N113A Lighter
Outfit No. NE835A
Torch HandleNE180A
TipsNE180-1 / NE180-2 / NE180-3
Regulator30-15-520 CGA 520
Fits Tanks“B” 40 cu. ft
AccessoriesRL121 12.5’ (3.8m) Hose N113A Lighter
Tip NumberFlame Opening (In)Flame Opening (mm)Flame Opening
Cone Length (In)
Flame Opening
Cone Length (mm)
Consumption
SCFH
BTU
Output
NE180-43/8”101-3/4”4522.832,900
NE180-31/4”61-1/2”389.013,000
NE180-23/16”51-1/4”325.27,500
NE180-19/64”3.63/4”192.84,000
NE180-03/32”2.41/4”61.52,200
NE180-001/16”1.71/8”30.5720
Tip number NE180-4
Flame Opening (In)3/8”
Flame Opening (mm)10
Flame Opening Cone Length (In)1-3/4”
Flame Opening Cone Length (In)45
Consumption SCFH22.8
BTU Output32,900
Tip number NE180-3
Flame Opening (In)1/4”
Flame Opening (mm)6
Flame Opening Cone Length (In)1-1/2”
Flame Opening Cone Length (In)38
Consumption SCFH9.0
BTU Output13,000
Tip number NE180-2
Flame Opening (In)3/16”
Flame Opening (mm)5
Flame Opening Cone Length (In)1-1/4”
Flame Opening Cone Length (In)32
Consumption SCFH5.2
BTU Output7,500
Tip number NE180-1
Flame Opening (In)9/64”
Flame Opening (mm)3.6
Flame Opening Cone Length (In)3/4”
Flame Opening Cone Length (In)19
Consumption SCFH2.8
BTU Output4,000
Tip number NE180-0
Flame Opening (In)3/32”
Flame Opening (mm)2.4
Flame Opening Cone Length (In)1/4”
Flame Opening Cone Length (In)6
Consumption SCFH1.5
BTU Output2,200
Tip number NE180-00
Flame Opening (In)1/16”
Flame Opening (mm)1.7
Flame Opening Cone Length (In)1/8”
Flame Opening Cone Length (In)3
Consumption SCFH0.5
BTU Output720

Filter these products