MW201 Medium-Duty Welding Tip
The MW201 Medium-Duty Welding Tip is for general purpose medium-duty welding which features our “soft flame” for easier puddle control and better penetration.
You may be interested in
Ask for more information
MW201 Medium-Duty Welding Tip
The MW201 Medium-Duty Welding Tip is for general purpose medium-duty welding which features our “soft flame” for easier puddle control and better penetration.
More from this category
Related products
Ask for more information
About this product
The MW201 Medium-Duty Welding Tip is for general purpose medium-duty welding which features our “soft flame” for easier puddle control and better penetration. Tips are bent to a 63.5-degree angle. O-ring replacement: MW15 (package of 25).
This welding tip is part of the MW200 Series. Authentic Miller® | Smith Equipment® tips are available in a wide variety of sizes and fuel gases for all of your heating, cutting, brazing, and welding needs.
Fuel gases for the MW201 Medium-Duty Welding Tip
These tips may also be used for brazing with acetylene-based fuels and propylene-based fuel gases. When using these gases, select a tip two sizes larger than recommended for the same work as acetylene.
*Consumption (SCFH: cubic feet per hour) figures represent the average volumes of gases consumed when acetylene is added until sooty smoke just disappears from the acetylene flame prior to opening the oxygen valve and adjusting to a neutral flame.
Compatible torch handles for the MW201 Medium-Duty Welding Tip
- WH100
- MW5A
- CW5A
Tip Number | Welding Capacity Inches (mm) | Consumption (SCFH) Oxygen | Consumption (SCFH) Acetylene | Drill Size |
---|---|---|---|---|
MW201 | 1/32 (0.7) | 2.3 | 2.3 | 71 |
Tip number MW201 | |
---|---|
Welding Capacity Inches (mm) | 1/32 (0.7) |
Consumption (SCFH) Oxygen | 2.3 |
Consumption (SCFH) Acetylene | 2.3 |
Drill Size | 71 |
About the Miller® | Smith Equipment® Oxy-Fuel Welding Tips
Our “soft flame” welding tips are 100-percent tested and inspected, and make welding easier.
Our welding tips are quality engineered to provide easy handling, high performance, and added protection in welding, brazing, and soldering operations.
Each tip is individually tested on our automatic testing machines and must pass stringent requirements for flame characteristics, gas flow, and resistance to backfire or flashback.
Select from quality tips for dependable performance with acetylene, natural gas (city gas), propane, and propylene-based fuels.
Construction features of the Miller® | Smith Equipment® Oxy-Fuel Welding Tips
“Soft flame”
Our “soft flame” welding tips provide concentrated heat for better “puddle” control — the turbulent-free flame eliminates puddle chasing.
Soft flame provides deep, even penetration without burning through base metal for strong, dependable welds. Molten metal is protected from atmospheric oxidation by a smooth, even flame envelope.
Heavy-wall copper
Heavy-wall copper gives greater resistance to reflected heat, permits cooler operation, and dissipates more heat than thin-wall copper.
Heat-absorbing tips provide longer life, and the long straight-away design permits tip refacing after excessive wear or abuse.
Slip-in tip design — just hand tighten
Tips may be rotated 360 degrees for convenient positioning, eliminating hose resistance during operation. Slip-in tips can be changed in just seconds. Hand-tighten, no wrench needed.
O-rings provide a gas-tight seal keeping gases separate until they mix in the tip.
After the first tightening with a wrench, only hand tightening is required to seat the tip, saving time when changing tips. Quick and easy tip changes encourage the use of the right tip for the job.
Each tip is a precision-engineered mixer for combining preheat oxygen and fuel gas to attain maximum efficiency. Adds resistance to flashback. Learn more about the in-tip mix.
O-ring seals
O-rings provide a gas-tight seal with no metal seating surface to damage if dropped. Gases are kept separate until entering the mixing chamber.
Caution: Authentic Miller® | Smith Equipment® tips must be used. To qualify for warranty repair, Miller® | Smith Equipment® torches must be returned with a tip. Aftermarket tips are often the cause of poor performance or malfunction.
About the MW201 Medium-Duty Welding Tip
See here the complete line of Oxy-Fuel Medium Duty Welding Tips.
Download here the warranty policy for all Oxy-Fuel and Pressure Regulation Equipment from Miller® | Smith Equipment®.
This MW201 Medium-Duty Welding Tip is manufactured by Miller® | Smith Equipment®. Ifexport is the Preferred International Authorized Miller® | Smith Equipment® Wholesaler.
Additional information
Weight | 0.45 lbs |
---|---|
Dimensions | 4 × 1.25 in |