MT603 Medium-Duty Heating Tip
The MT603 Medium-Duty Heating Tip are versatile multi-flame heating tips for the popular medium-duty torch handles. Used for general heating of metals, brazing, hard surfacing, etc.
You may be interested in
Ask for more information
MT603 Medium-Duty Heating Tip
The MT603 Medium-Duty Heating Tip are versatile multi-flame heating tips for the popular medium-duty torch handles. Used for general heating of metals, brazing, hard surfacing, etc.
More from this category
Related products
Ask for more information
About this product
The MT603 Medium-Duty Heating Tip is a versatile multi-flame heating tips for the popular medium-duty torch handles. Used for general heating of metals, brazing, hard surfacing, etc. Heads are manufactured from solid copper.
These medium pressure acetylene-based heating tips are used for heat treating, bending, straightening, pre-heating, brazing, shrinking, forming, etc.
This heating tip is part of the MT600 Series. Authentic Miller® | Smith Equipment® tips are available in a wide variety of sizes and fuel gases for all of your heating, cutting, brazing, and welding needs.
Compatible torch handles for the MT603 Medium-Duty Heating Tip
- WH200A
- WH200
- SW1B
- SW1A
- SW1
Tip Number | Average BTU/Hour | Consumption (SCFH) Oxygen | Consumption (SCFH) Acetylene | Drill Size | 350 Cu. Ft. Fuel Cylinders Required | Overall Length Inches (mm) |
---|---|---|---|---|---|---|
MT603 | 40,125 | 31 | 28 | 64 | 1 | 10 (254) |
Tip number MT603 | |
---|---|
Average BTU/Hour | 40,125 |
Consumption (SCFH) Oxygen | 31 |
Consumption (SCFH) Acetylene | 28 |
Drill Size | 64 |
350 Cu. Ft. Fuel Cylinders Required | 1 |
Overall Length Inches (mm) | 10 (254) |
About the Heavy Duty Heating Tips
Heating tips used in torch handles provide significant cost savings in many applications. Heating tips do jobs faster and cut labor time to a minimum by providing great amounts of quick, concentrated heat.
For proper performance, use the recommended pressures for each tip and an adequate gas supply.
CAUTION: Manifold cylinders
When required flows (cubic feet per hour — SCFH) exceed the recommended withdrawal rate from one cylinder, then additional cylinders must be manifolded to provide safe and efficient operation. Acetylene must not be withdrawn at more than 1/7 of the cylinder capacity per hour (50 SCFH for a 350-cu.-ft. cylinder). Consult your gas supplier for manifold instructions for the gases and cylinders supplied to you.
CAUTION: Flashback arrestors
Heating tips must be used in conjunction with high-flow flashback arrestors. It may be necessary to increase outlet pressures to compensate for flow restrictions that may be created by flashback arrestors.
About the MT603 Medium-Duty Heating Tip
See here the complete line of Oxy-Fuel Medium Duty Heating Tips.
Download here the warranty policy for all Oxy-Fuel and Pressure Regulation Equipment from Miller® | Smith Equipment®.
This MT603 Medium-Duty Heating Tip is manufactured by Miller® | Smith® Gas Equipment. Ifexport is the Preferred International Authorized Miller® | Smith® Gas Equipment Wholesaler.
Additional information
Weight | 0.7 lbs |
---|---|
Dimensions | 4.5 × 1.5 in |