ST625 Heavy-Duty Heating Tip
The ST625 Heavy-Duty Heating Tip is a multi-flame heating tip for our heavy-duty torch handles. HD Acetylene heating tip, 40,125 Average BTU/HR.
You may be interested in
Ask for more information
ST625 Heavy-Duty Heating Tip
The ST625 Heavy-Duty Heating Tip is a multi-flame heating tip for our heavy-duty torch handles. HD Acetylene heating tip, 40,125 Average BTU/HR.
More from this category
Related products
Ask for more information
About this product
The ST625 Heavy-Duty Heating Tip is a multi-flame heating tip for our heavy-duty torch handles. HD Acetylene heating tip, 40,125 Average BTU/HR.
These tips are used for heat treating, bending, straightening, pre-heating, brazing, shrinking, forming, etc. Heads are manufactured from solid copper.
This heating tip is part of the ST600 Series. Authentic Miller® | Smith Equipment® tips are available in a wide variety of sizes and fuel gases for all of your heating, cutting, brazing, and welding needs.
Compatible torch handles for the ST625 Heavy-Duty Heating Tip
- WH200A
- WH200
- SW1B
- SW1A
- SW1
Tip Number | Average BTU/Hour | Consumption (SCFH) Oxygen | Consumption (SCFH) Fuel Gas | Overall Length Inches (mm) | Torch Head Number |
---|---|---|---|---|---|
ST625 | 455,000 313,950 | 480–1000 390–785 | 140-280 (propane) 200–450 (natural gas) | 31.5 (800) | 1504 |
Tip number ST625 | |
---|---|
Average BTU/Hour | 455,000 313,950 |
Consumption (SCFH) Oxygen | 480–1000 390–785 |
Consumption (SCFH) Fuel Gas | 140-280 (propane) 200–450 (natural gas) |
Overall Length Inches (mm) | 31.5 (800) |
Torch Head Number | 1504 |
About the Heavy Duty Heating Tips
Heating tips used in torch handles provide significant cost savings in many applications. Heating tips do jobs faster and cut labor time to a minimum by providing great amounts of quick, concentrated heat.
For proper performance, use the recommended pressures for each tip and an adequate gas supply.
CAUTION: Manifolding cylinders
When required flows (cubic feet per hour — SCFH) exceed the recommended withdrawal rate from one cylinder, then additional cylinders must be manifolded to provide safe and efficient operation. Acetylene must not be withdrawn at more than 1/7 of the cylinder capacity per hour (50 SCFH for a 350-cu.-ft. cylinder). Consult your gas supplier for manifolding instructions for the gases and cylinders supplied to you.
CAUTION: Flashback arrestors
Heating tips must be used in conjunction with high-flow flashback arrestors. It may be necessary to increase outlet pressures to compensate for flow restrictions that may be created by flashback arrestors.
About the ST625 Heavy-Duty Heating Tip
See here the complete line of Oxy-Fuel Heavy Duty Heating Tips.
Download here the warranty policy for all Oxy-Fuel and Pressure Regulation Equipment from Miller® | Smith Equipment®.
This product is manufactured by Miller® | Smith® Gas Equipment. Ifexport is the Preferred International Authorized Miller® | Smith® Gas Equipment Wholesaler.
Additional information
Weight | 2.65 lbs |
---|---|
Dimensions | 3.5 × 3.5 in |