Handi-Heet™
Home » Handi-Heet™
Handi-Heet™ soldering outfits provide fast heat with acetylene and atmospheric air. It is not sensitive to temperature changes.
Handi-Heet™ is an acetylene/air kit for heating, soldering, brazing, and sweating.
Acetylene/Air Handi-Heet™ Outfit
Handi-Heet™ soldering outfits provide fast heat with acetylene and atmospheric air. Concentrated soft flame delivers 4700 °F heat just where it is needed for maximum performance on all types of soldering, heating, thawing and other applications. No oxygen tank required.
The NE180A Torch
The tough NE180A torch handle is built to last – machined from solid brass. Unlike plastic torches, it is not sensitive to temperature changes.
Full length fluted handle provides firm comfortable grip. Needle valve provides excellent flame adjustment. Easy to operate, just hold torch and set flame with one hand.
Handi-Heet™ soldering tips have Miller® | Smith Equipment® famous Slip-in design. Seats perfectly by hand, no wrench needed. “O” ring provides tight gas seal and allows operator to rotate tip to any position.
All tips and torch body are nickel plated. Sturdy single stage regulator provides steady and sensitive gas regulation for maximum torch performance.
NOTE: Torch does not require check valves or flashback arrestors.
About the Acetylene/Air Torch & Tips Features
These acetylene/air torch & tips burns acetylene with atmospheric air. Ideal for sweating copper joints up to 6” (152 mm) in diameter, soldering, leading, thawing, heating and straightening.
Acetylene/Air Torch & Tips Features
- No oxygen tank needed
- Clean, economical heat
- No wrench needed, tips are hand tightened
- One-handed flame adjustment
- 360° Tip turning radius
- Tough all brass body
- Smooth turning needle valve
- Rugged tips
- Nickel plated for added heat resistance
- Fuel pressure setting: 12-14 PSIG
Outfit No. | Torch Handle | Tips | Regulator | Fits Tanks | Accessories |
---|---|---|---|---|---|
NE835A | NE180A | NE180-1 NE180-2 NE180-3 | 30-15-520 CGA 520 | “B” 40 cu. ft | RL121 12.5’ (3.8m) Hose N113A Lighter |
Outfit No. NE835A | |
---|---|
Torch Handle | NE180A |
Tips | NE180-1 / NE180-2 / NE180-3 |
Regulator | 30-15-520 CGA 520 |
Fits Tanks | “B” 40 cu. ft |
Accessories | RL121 12.5’ (3.8m) Hose N113A Lighter |
Tip Number | Flame Opening (In) | Flame Opening (mm) | Flame Opening Cone Length (In) | Flame Opening Cone Length (mm) | Consumption SCFH | BTU Output |
---|---|---|---|---|---|---|
NE180-4 | 3/8” | 10 | 1-3/4” | 45 | 22.8 | 32,900 |
NE180-3 | 1/4” | 6 | 1-1/2” | 38 | 9.0 | 13,000 |
NE180-2 | 3/16” | 5 | 1-1/4” | 32 | 5.2 | 7,500 |
NE180-1 | 9/64” | 3.6 | 3/4” | 19 | 2.8 | 4,000 |
NE180-0 | 3/32” | 2.4 | 1/4” | 6 | 1.5 | 2,200 |
NE180-00 | 1/16” | 1.7 | 1/8” | 3 | 0.5 | 720 |
Tip number NE180-4 | |
---|---|
Flame Opening (In) | 3/8” |
Flame Opening (mm) | 10 |
Flame Opening Cone Length (In) | 1-3/4” |
Flame Opening Cone Length (In) | 45 |
Consumption SCFH | 22.8 |
BTU Output | 32,900 |
Tip number NE180-3 | |
---|---|
Flame Opening (In) | 1/4” |
Flame Opening (mm) | 6 |
Flame Opening Cone Length (In) | 1-1/2” |
Flame Opening Cone Length (In) | 38 |
Consumption SCFH | 9.0 |
BTU Output | 13,000 |
Tip number NE180-2 | |
---|---|
Flame Opening (In) | 3/16” |
Flame Opening (mm) | 5 |
Flame Opening Cone Length (In) | 1-1/4” |
Flame Opening Cone Length (In) | 32 |
Consumption SCFH | 5.2 |
BTU Output | 7,500 |
Tip number NE180-1 | |
---|---|
Flame Opening (In) | 9/64” |
Flame Opening (mm) | 3.6 |
Flame Opening Cone Length (In) | 3/4” |
Flame Opening Cone Length (In) | 19 |
Consumption SCFH | 2.8 |
BTU Output | 4,000 |
Tip number NE180-0 | |
---|---|
Flame Opening (In) | 3/32” |
Flame Opening (mm) | 2.4 |
Flame Opening Cone Length (In) | 1/4” |
Flame Opening Cone Length (In) | 6 |
Consumption SCFH | 1.5 |
BTU Output | 2,200 |
Tip number NE180-00 | |
---|---|
Flame Opening (In) | 1/16” |
Flame Opening (mm) | 1.7 |
Flame Opening Cone Length (In) | 1/8” |
Flame Opening Cone Length (In) | 3 |
Consumption SCFH | 0.5 |
BTU Output | 720 |
-
- Handi-Heet
239-193 Handi-Heet™ Soldering Outfit, Air/Acetylene
- The 239-193 Soldering Outfit, Air/Acetylene Handi-Heet™ is a soldering outfit that provides fast heat with acetylene and atmospheric air, no…
- Read more
-
- Handi-Heet
NE180-0 Handi-Heet™ Air/Acetylene Tip 2200 BTU
- The NE180-0 Handi-Heet™ Air/Acetylene Tip 2200 BTU is a nickel-plated soldering tip with slip-in design, only hand-tightened.
- Read more
-
- Handi-Heet
NE180-00 Handi-Heet™ Air/Acetylene Tip 720 BTU
- The NE180-00 Handi-Heet™ Air/Acetylene Tip 720 BTU is designed with synthetic sapphire orifice for precise, soft, consistent flame.
- Read more
-
- Handi-Heet
NE180-1 Handi-Heet™ Air/Acetylene Tip 4000 BTU
- The NE180-1 Handi-Heet™ Air/Acetylene Tip 4000 BTU is a nickel-plated soldering tip with slip-in design, only hand tighten.
- Read more
-
- Handi-Heet
NE180-2 Handi-Heet™ Air/Acetylene Tip 7500 BTU
- The NE180-2 Handi-Heet™ Air/Acetylene Tip 7500 BTU is a nickel-plated soldering tip with slip-in design, only hand-tightened.
- Read more
-
- Handi-Heet
NE180-3 Handi-Heet™ Air/Acetylene Tip 13000 BTU
- The NE180-3 Handi-Heet™ Air/Acetylene Tip 13000 BTU is a nickel-plated soldering tip with slip-in design, only hand-tightened. Tip can be…
- Read more
-
- Handi-Heet
NE180-4 Handi-Heet™ Air/Acetylene Tip 32900 BTU
- The NE180-4 Handi-Heet™ Air/Acetylene Tip 32900 BTU is a nickel-plated soldering tip with slip-in design, only hand tighten.
- Read more
-
- Handi-Heet
NE835A Handi-Heet™ Soldering Outfit for Air/Acetylene
- The NE835A Handi-Heet™ Soldering Outfit for Air/Acetylene is a soldering outfit that provides fast heat with acetylene and atmospheric air,…
- Read more