In-Tip Mix
Home » In-Tip Mix
Gas mixing in tubes increases volume of volatile, mixed gas involved in a “Flashback”. Tube burnout can occur and destroy equipment, causing fire or injuring operators. In case of Miller® | Smith Equipment® tips, In-Tip Mix means that fuel and oxygen mixing occurs in the torch tip, as far downstream and away from the operator as possible.
Miller® | Smith Equipment® In-Tip Mix design means these torches can be used with any fuel gas. The saying “change the tip, change the torch” is not valid here. Each tip is specifically designed to mix and burn the intended fuel gas.
-
- Heavy Duty Torches
SC175 Heavy Duty Straight Cutting Hand Torch, 17 in, 75 deg
- The SC175 Heavy Duty Straight Cutting Hand Torch, 17 in, 75 degrees cuts up to 12-inch (305 mm) thick steel.…
- Read more
-
- Heavy Duty Torches
SC179 Heavy Duty Straight Cutting Hand Torch, 17 in, 90 deg
- The SC179 Heavy Duty Straight Cutting Hand Torch, 17 in, 90 degrees cuts up to 12-inch (305 mm) thick steel.…
- Read more
-
- Heavy Duty Torches
SC220 Heavy Duty Straight Cutting Hand Torch, 21 in, 180 deg
- The SC220 Heavy Duty Straight Cutting Hand Torch, 21 in, 180 degrees cuts up to 12-inch (305 mm) thick steel.…
- Read more
-
- Heavy Duty Torches
SC225 Heavy Duty Straight Cutting Hand Torch, 21 in, 75 deg
- The SC225 Heavy Duty Straight Cutting Hand Torch, 21 in, 75 degrees cuts up to 12-inch (305 mm) thick steel.…
- Read more
-
- Heavy Duty Torches
SC225S Heavy Duty Straight Cutting Hand Torch, 21 in, 75 deg
- The SC225S Heavy Duty Straight Cutting Hand Torch, 21 in, 75 degrees cuts up to 12-inch (305 mm) thick steel.…
- Read more
-
- Heavy Duty Torches
SC229 Heavy Duty Straight Cutting Hand Torch, 21 in, 90 deg
- The SC229 Heavy Duty Straight Cutting Hand Torch, 21 in, 90 degrees cuts up to 12-inch (305 mm) thick steel.…
- Read more
-
- Heavy Duty Torches
SC229S Heavy Duty Straight Cutting Hand Torch, 21 in, 90 deg
- The SC229S Heavy Duty Straight Cutting Hand Torch, 21 in, 90 degrees cuts up to 12-inch (305 mm) thick steel.…
- Read more
-
- Heavy Duty Torches
SC360 Heavy Duty Straight Cutting Hand Torch, 36 in, 180 deg
- The SC360 Heavy Duty Straight Cutting Hand Torch, 36 in, 180 degrees cuts up to 12-inch (305 mm) thick steel.…
- Read more
-
- Heavy Duty Torches
SC365 Heavy Duty Straight Cutting Hand Torch, 36 in, 75 deg
- The SC365 Heavy Duty Straight Cutting Hand Torch, 36 in, 75 degrees cuts up to 12-inch (305 mm) thick steel.…
- Read more
-
- Heavy Duty Torches
SC369 Heavy Duty Straight Cutting Hand Torch, 36 in, 90 deg
- The SC369 Heavy Duty Straight Cutting Hand Torch, 36 in, 90 degrees cuts up to 12-inch (305 mm) thick steel.…
- Read more