SKU ST610 Category Heavy Duty Heating Tips Series Acetylene, Brazing, Heavy Duty, Oxygen, Series ST600

ST610 Heavy Duty Heating Tip

The ST610 Heavy Duty Heating Tip is a multi-flame heating tip for our heavy-duty torch handles. HD Acetylene heating tip, 194,890 Average BTU/HR.

Ask for more information

ST610 Heavy Duty Heating Tip

The ST610 Heavy Duty Heating Tip is a multi-flame heating tip for our heavy-duty torch handles. HD Acetylene heating tip, 194,890 Average BTU/HR.

SKU ST610 Category Heavy Duty Heating Tips Applications Acetylene, Brazing, Heavy Duty, Oxygen, Series ST600

Ask for more information

About this product

The ST610 Heavy Duty Heating Tip is a multi-flame heating tip for our heavy-duty torch handles. HD Acetylene heating tip, 40,125 Average BTU/HR.

These tips are used for heat treating, bending, straightening, pre-heating, brazing, shrinking, forming, etc. Heads are manufactured from solid copper.

This heating tip is part of the ST600 Series. Authentic Miller® | Smith Equipment® tips are available in a wide variety of sizes and fuel gases for all of your heating, cutting, brazing, and welding needs.

Compatible torch handles for the ST610 Heavy Duty Heating Tip

WH200A
WH200
SW1B
SW1A
SW1

Tip Number	Average BTU/Hour	Consumption (SCFH) Oxygen	Consumption (SCFH) Acetylene	Drill Size	350 Cu. Ft. Fuel Cylinders Required	Overall Length Inches (mm)
ST610	194,890	150	136	54	3	19 (483)

Tip number ST610
Average BTU/Hour	194,890
Consumption (SCFH) Oxygen	150
Consumption (SCFH) Acetylene	136
Drill Size	54
350 Cu. Ft. Fuel Cylinders Required	3
Overall Length Inches (mm)	19 (483)

About the Heavy Duty Heating Tips

Heating tips used in torch handles provide significant cost savings in many applications. Heating tips do jobs faster and cut labor time to a minimum by providing great amounts of quick, concentrated heat.

For proper performance, use the recommended pressures for each tip and an adequate gas supply.

CAUTION: Manifold cylinders

When required flows (cubic feet per hour — SCFH) exceed the recommended withdrawal rate from one cylinder, then additional cylinders must be manifolded to provide safe and efficient operation. Acetylene must not be withdrawn at more than 1/7 of the cylinder capacity per hour (50 SCFH for a 350-cu.-ft. cylinder). Consult your gas supplier for manifold instructions for the gases and cylinders supplied to you.

CAUTION: Flashback arrestors

Heating tips must be used in conjunction with high-flow flashback arrestors. It may be necessary to increase outlet pressures to compensate for flow restrictions that may be created by flashback arrestors.

About the ST610 Heavy Duty Heating Tip

See here the complete line of Oxy-Fuel Heavy Duty Heating Tips.

Download here the warranty policy for all Oxy-Fuel and Pressure Regulation Equipment from Miller® | Smith Equipment®.

This product is manufactured by Miller® | Smith® Gas Equipment. Ifexport is the Preferred International Authorized Miller® | Smith® Gas Equipment Wholesaler.