ST603 Heavy Duty Heating Tip
The ST603 Heavy Duty Heating Tip is a multi-flame heating tip for our heavy-duty torch handles. HD Acetylene heating tip, 71,750 Average BTU/HR.
You may be interested in
Ask for more information
ST603 Heavy Duty Heating Tip
The ST603 Heavy Duty Heating Tip is a multi-flame heating tip for our heavy-duty torch handles. HD Acetylene heating tip, 71,750 Average BTU/HR.
More from this category
Related products
Ask for more information
About this product
The ST603 Heavy Duty Heating Tip is a multi-flame heating tip for our heavy-duty torch handles. HD Acetylene heating tip, 40,125 Average BTU/HR.
These tips are used for heat treating, bending, straightening, pre-heating, brazing, shrinking, forming, etc. Heads are manufactured from solid copper.
This heating tip is part of the ST600 Series. Authentic Miller® | Smith Equipment® tips are available in a wide variety of sizes and fuel gases for all of your heating, cutting, brazing, and welding needs.
Compatible torch handles for the ST603 Heavy Duty Heating Tip
- WH200A
- WH200
- SW1B
- SW1A
- SW1
Tip Number | Average BTU/Hour | Consumption (SCFH) Oxygen | Consumption (SCFH) Acetylene | Drill Size | 350 Cu. Ft. Fuel Cylinders Required | Overall Length Inches (mm) |
---|---|---|---|---|---|---|
ST603 | 71,750 | 55 | 50 | 56 | 1 | 16 (406) |
Tip number ST603 | |
---|---|
Average BTU/Hour | 71,750 |
Consumption (SCFH) Oxygen | 55 |
Consumption (SCFH) Acetylene | 50 |
Drill Size | 56 |
350 Cu. Ft. Fuel Cylinders Required | 1 |
Overall Length Inches (mm) | 16 (406) |
About the Heavy Duty Heating Tips
Heating tips used in torch handles provide significant cost savings in many applications. Heating tips do jobs faster and cut labor time to a minimum by providing great amounts of quick, concentrated heat.
For proper performance, use the recommended pressures for each tip and an adequate gas supply.
CAUTION: Manifold cylinders
When required flows (cubic feet per hour — SCFH) exceed the recommended withdrawal rate from one cylinder, then additional cylinders must be manifolded to provide safe and efficient operation. Acetylene must not be withdrawn at more than 1/7 of the cylinder capacity per hour (50 SCFH for a 350-cu.-ft. cylinder). Consult your gas supplier for manifold instructions for the gases and cylinders supplied to you.
CAUTION: Flashback arrestors
Heating tips must be used in conjunction with high-flow flashback arrestors. It may be necessary to increase outlet pressures to compensate for flow restrictions that may be created by flashback arrestors.
About the ST603 Heavy Duty Heating Tip
See here the complete line of Oxy-Fuel Heavy Duty Heating Tips.
Download here the warranty policy for all Oxy-Fuel and Pressure Regulation Equipment from Miller® | Smith Equipment®.
This product is manufactured by Miller® | Smith® Gas Equipment. Ifexport is the Preferred International Authorized Miller® | Smith® Gas Equipment Wholesaler.
Additional information
Weight | 1.45 lbs |
---|---|
Dimensions | 5.5 × 1.5 in |