MBA-30510LP Oxy-Fuel Medium-Duty Outfit
This MBA-30510LP Oxy-Fuel Medium-Duty Outfit cuts up to 6 inches (153 mm) with optional tips. Welds up to 3/8 inch (9.8 mm) with optional tips.
You may be interested in
Ask for more information
MBA-30510LP Oxy-Fuel Medium-Duty Outfit
This MBA-30510LP Oxy-Fuel Medium-Duty Outfit cuts up to 6 inches (153 mm) with optional tips. Welds up to 3/8 inch (9.8 mm) with optional tips.
More from this category
Related products
Ask for more information
About this product
MBA-30510LP Oxy-Fuel Medium-Duty Outfit. MD Acetylene outfit w/acc, CGA 510.
This MBA-30510LP Oxy-Fuel Medium-Duty Outfit cuts up to 6 inches (153 mm) with optional tips. Welds up to 3/8 inch (9.8 mm) with optional tips.
These premium medium-duty outfits feature quality construction throughout and are built to provide reliability and extended service. Outfits feature our proven in-tip gas mixing technology for propane/LP gas.
This combination greatly improves operator safety and increases torch life. Outfits feature rugged, highly accurate Series 30™ regulators with 2-inch gauges constructed with Sure Seat™ technology and shatter-resistant polycarbonate lenses.
The outfits feature a rugged cutting attachment, torch handle, safety and operations manual, and are covered by the Miller True Blue™ warranty.
Additional equipment for the MBA-30510LP Oxy-Fuel Medium-Duty Outfit
Welding may require additional equipment depending on which outfit is ordered. See chart below.
Stock Number | Fuel Gas | Torch Handle | Cutting Attachment | Cutting Tip | Welding Tip | Heating Tip | Oxygen Regulator | Fuel Gas Regulator | Includes |
---|---|---|---|---|---|---|---|---|---|
MBA-30510LP | Propane or Natural Gas | WH100 | MC509 | MC40-1 | - | MT805 | 30-100-540 CGA 540 | 30-15-510 CGA 510 | Propane/Propylene (LP/MP) outfits include 20-ft. (6.1 m) 1/4-in. (6 mm) “T” grade hose and check valves, not flashback arrestors |
MBA-30510LP | |
---|---|
Fuel Gas | Propane or Natural Gas |
Torch Handle | WH100 |
Cutting Attachment | MC509 |
Cutting Tip | MC40-1 |
Welding Tip | - |
Heating Tip | MT805 |
Oxygen Regulator | 30-100-540 CGA 540 |
Fuel Gas Regulator | 30-15-510 CGA 510 |
Includes | Propane/Propylene (LP/MP) outfits include 20-ft. (6.1 m) 1/4-in. (6 mm) “T” grade hose and check valves, not flashback arrestors |
Main features of the MBA-30510LP Oxy-Fuel Medium-Duty Outfit
Cutting Tip
Graf-Tite® soft seats. Resilient Graf-Tite® seat material protects tip seating areas from nicking to maintain positive seating. Requires less replacement than metal-to-metal seat designs. Compressible soft seats are practically indestructible and withstand extremely high temperatures, resulting in longer tip life.
In-tip mix. Each tip is a precision engineered mixer for combining preheat oxygen and fuel gas to attain maximum efficiency. Adds resistance to flashback. Learn more about In-tip mix.
Slip-in tip design — just hand tighten. After the first tightening with a wrench, only hand tightening is required to seat the tip, saving time when changing tips. Quick and easy tip changes encourage use of right tip for the job.
Removable high-pressure seat. Allows cleaning from back of tip.
Torch Handles
Internal threads. Threads are protected from damage if the torch is dropped, eliminating costly torch repair, replacement or downtime.
Double-tube handle .Tube-within-a-tube design provides strength while reducing weight. Internal tube is silver brazed for extra protection, strength and leak resistance.
Adjustable valve resistance. Special PTFE packing provides a gas-tight seal while allowing the “drag” to be adjusted to the individual preference.
Stainless steel ball-style valves. Corrosion-resistant balls and brass seating surfaces provide gall resistance and positive, chatter-free seating.
Replaceable hose connections. Hose connections are easily replaced if damaged.
Cutting Attachment
Slip-in cutting tips. Save time when changing tips — no wrench needed. Resilient Graf-Tite® seat material protects tip from nicking and maintains positive seating. Requires less replacement than metal-to-metal seat designs.
Three-tube construction. Gases are kept separated, eliminating mixing tube burnout. Our thick-wall, high-capacity stainless steel tubes provide high gas flow and superior strength.
Ease-on oxygen cutting valve. Allows smooth piercing and keyhole free starts and restarts.
Triple o-ring seal. Provides positive gas seal, and allows rotation.
Processes
- Oxy-Fuel Cutting
- Welding
- Heating
In the box
- Torch handle (WH100)
- Cutting attachment (MC509)
- Oxygen Regulator(30-100-540)
- LPG Regulator (30-50-510)
- Cutting Tip (MC40-1)
- Heating Tip (MT805)
- 20-ft 1/4″ Twin Hose (TRL1131)
- Friction Lighter (N113ANB)
- Safety Glasses (78000)
- Tip cleaner (N250)
- Regulator Mount Check Valves (H698)
- Operations Manual
Industries Interests
- Aerospace
- Racing / Customizing / Restoring
- Construction
- DIY / Home Hobbyist
- Farm and Ranch
- Heavy Equipment Manufacturing
- Infrastructure
- Manufacturing
- Metal Art / Sculptures
- Railcar
- Shipbuilding
- Boat / Yacht
- High Purity Processing
Warranty
- 1 Years Miller®’s Gas Equipment and Gas Control Warranty
About the MBA-30510LP Oxy-Fuel Medium-Duty Outfit
See here the complete line of Oxy-Fuel Medium-Duty Outfits.
Download here the warranty policy for all Oxy-Fuel and Pressure Regulation Equipment from Miller® | Smith Equipment®.
This product is manufactured by Miller® | Smith Equipment®. Ifexport is the Preferred International Authorized Miller® | Smith® Gas Equipment Wholesaler.
Additional information
Weight | 16 lbs |
---|---|
Dimensions | 17 × 5 in |