{"id":93,"date":"2021-05-18T17:37:06","date_gmt":"2021-05-18T21:37:06","guid":{"rendered":"https:\/\/www.internationalgasequipment.com\/es\/?page_id=93"},"modified":"2025-05-08T08:09:55","modified_gmt":"2025-05-08T12:09:55","slug":"preguntas-frecuentes","status":"publish","type":"page","link":"https:\/\/www.internationalgasequipment.com\/es\/preguntas-frecuentes\/","title":{"rendered":"Preguntas Frecuentes"},"content":{"rendered":"\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Preguntas Frecuentes<\/h1>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Inicio<\/a><\/span><\/span><\/p>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Temas generales<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

\u00bfCu\u00e1l es la garant\u00eda de los productos Smith?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Puede variar de un producto a otro. Consulte la pol\u00edtica de garant\u00eda de equipos de gas Smith.<\/a><\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

\u00bfPuedo cortar cualquier metal con Smith?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

No. El corte con oxicorte es solo para cortar acero dulce.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

\u00bfQu\u00e9 procesos puedo hacer con Smith?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Puede cortar, soldar, brazing (soldadura fuerte) y calentar.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

\u00bfCu\u00e1l es el grosor m\u00e1ximo que puedo cortar?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Esto variar\u00e1 seg\u00fan el soplete, la boquilla y el gas combustible que est\u00e9 utilizando. Con acetileno puede cortar hasta 12\u2033 y propano o gas natural hasta 20\u2033. Recuerde: variar\u00e1 seg\u00fan la punta que elija y el soplete de corte que tenga.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t\t
\n\t\t\t\t\t<\/i><\/div>\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t\t
\n\t\t\t
\n\t\t\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

Acerca de Little Torch\u2122<\/h2>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

\u00bfC\u00f3mo reemplazar la manguera del Little Torch?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Hay instrucciones paso a paso, junto con una f\u00e9rula (banda de retenci\u00f3n de manguera de lat\u00f3n) y una herramienta de reemplazo de f\u00e9rula que acompa\u00f1an a todos los conjuntos de mangueras de repuesto. Para obtener instrucciones detalladas, consulte el manual del propietario. Recomendaci\u00f3n: Reemplace las mangueras cada cinco a\u00f1os.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

\n\t\t\t\t
\n\t\t\t\t\t\t\t
\n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t

\u00bfCu\u00e1les son los n\u00fameros de pieza de los conjuntos de mangueras de repuesto de Little Torch?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
\n\t\t\t\t
\n\t\t\t\t\t\t\t\t\t

Dependiendo de los accesorios de la manguera, necesitar\u00e1 el siguiente conjunto de manguera:<\/span><\/p>

  • 13254-4-8 Conexiones de manguera est\u00e1ndar \u00abB\u00bb 9\/16\u2033-18<\/li>
  • 13254-5-8 Conexiones de manguera australianas<\/li>
  • 13254-6-8 Conexiones de manguera brit\u00e1nicas<\/li>
  • 13254-7-8 Racores de manguera europeos<\/li><\/ul>

    Cada conjunto de manguera incluye una manguera de ox\u00edgeno de 8 pies (verde), una manguera de combustible de 8 pies (roja), dos casquillos de manguera, una herramienta de engarzado y un manual. Recomendaci\u00f3n: Reemplace las mangueras cada cinco a\u00f1os.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    \u00bfSe puede limpiar el orificio de las puntas Little Torch?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Si el orificio est\u00e1 obstruido por el fundente, a menudo se pueden limpiar hirviendolos en agua durante aproximadamente 10 minutos. Otros m\u00e9todos utilizados para limpiar las boquillas secas implican el uso de un limpiador a vapor tipo joyero o un limpiador ultras\u00f3nico.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    \u00bfPor qu\u00e9 es dif\u00edcil encender o mantener encendida mi boquilla de tama\u00f1o Nro 2?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Por lo general, esto se debe a presiones de gas excesivas. Se recomienda un m\u00e1ximo de solo dos psi de presi\u00f3n de salida para ambos gases y el uso de una llama abierta hace que encender la peque\u00f1a llama sea mucho m\u00e1s f\u00e1cil.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    \u00bfPara qu\u00e9 se utilizan las puntas de llama gemela?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Las puntas de llama gemelas flexibles se pueden utilizar para calentar ambos lados de un objeto. Pueden acelerar el proceso de brazing y proporcionar un calentamiento uniforme para flujos de soldadura completos y m\u00e1s uniformes.<\/span><\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    What are the flame sizes and orifice diameters of the tips?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\n\t\t\t\n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t
    Tip
    Size<\/th>    		Orifice
    Diameter<\/th>    		Orifice
    Drill Size<\/th>    		Btu\/Hour<\/th>Recommended
    Pressures
    for Both Gases (psi)<\/th>    		Approximate Overall
    Flame Length<\/th>    		Brazing Capacity
    Copper Pipe<\/th>\t\t\t\t<\/tr>\n\t\t\t<\/thead>\n\t\t\t\t\t\t
    No. 2<\/td>.006 in.<\/td>97<\/td>130<\/td>2<\/td>.125 in.<\/td>-<\/td><\/tr>
    No. 3<\/td>.011 in.<\/td>85<\/td>1,150<\/td>4<\/td>1.5 in.<\/td>Up to 1\/8 in.<\/td><\/tr>
    No. 4<\/td>.020 in.<\/td>76<\/td>2,300<\/td>5<\/td>5.5 in. (thin)<\/td>1\/4\u20133\/8 in.<\/td><\/tr>
    No. 5<\/td>.029 in.<\/td>69<\/td>3,800<\/td>6<\/td>5.5 in.<\/td>5\/16\u20135\/8 in.<\/td><\/tr>
    No. 6<\/td>.037 in.<\/td>63<\/td>6,585<\/td>6<\/td>6.5 in.<\/td>3\/8\u20133\/4 in.<\/td><\/tr>
    No. 7<\/td>.047 in.<\/td>56<\/td>9,200<\/td>8<\/td>7 in.<\/td>1\/2\u20137\/8 in.<\/td>\t\t\t\t<\/tr>\n\t\t\t<\/tbody>\n\t\t<\/table>\n\t\t\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\n\t\t\t\n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t
    Tip No. 2<\/th>\t\t\t\t<\/tr>\n\t\t\t<\/thead>\n\t\t\t\t\t\t
    Orifice Diameter<\/td>.006 in.<\/td><\/tr>
    Orifice Drill Size<\/td>97<\/td><\/tr>
    Btu\/Hour<\/td>130<\/td><\/tr>
    Recommended Pressures
    for Both Gases (psi)<\/td>    		2<\/td><\/tr>
    Approximate Overall
    Flame Length<\/td>    		.125 in.<\/td><\/tr>
    Brazing Capacity
    Copper Pipe<\/td>    		-<\/td>\t\t\t\t<\/tr>\n\t\t\t<\/tbody>\n\t\t<\/table>\n\t\t\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\n\t\t\t\n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t
    Tip No. 3<\/th>\t\t\t\t<\/tr>\n\t\t\t<\/thead>\n\t\t\t\t\t\t
    Orifice Diameter<\/td>.011 in.<\/td><\/tr>
    Orifice Drill Size<\/td>85<\/td><\/tr>
    Btu\/Hour<\/td>1,150<\/td><\/tr>
    Recommended Pressures
    for Both Gases (psi)<\/td>    		4<\/td><\/tr>
    Approximate Overall
    Flame Length<\/td>    		1.5 in.<\/td><\/tr>
    Brazing Capacity
    Copper Pipe<\/td>    		Up to 1\/8 in.<\/td>\t\t\t\t<\/tr>\n\t\t\t<\/tbody>\n\t\t<\/table>\n\t\t\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\n\t\t\t\n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t
    Tip No. 4<\/th>\t\t\t\t<\/tr>\n\t\t\t<\/thead>\n\t\t\t\t\t\t
    Orifice Diameter<\/td>.020 in.<\/td><\/tr>
    Orifice Drill Size<\/td>76<\/td><\/tr>
    Btu\/Hour<\/td>2,300<\/td><\/tr>
    Recommended Pressures
    for Both Gases (psi)<\/td>    		5<\/td><\/tr>
    Approximate Overall
    Flame Length<\/td>    		5.5 in. (thin)<\/td><\/tr>
    Brazing Capacity
    Copper Pipe<\/td>    		1\/4\u20133\/8 in.<\/td>\t\t\t\t<\/tr>\n\t\t\t<\/tbody>\n\t\t<\/table>\n\t\t\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\n\t\t\t\n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t
    Tip No. 5<\/th>\t\t\t\t<\/tr>\n\t\t\t<\/thead>\n\t\t\t\t\t\t
    Orifice Diameter<\/td>.029 in.<\/td><\/tr>
    Orifice Drill Size<\/td>69<\/td><\/tr>
    Btu\/Hour<\/td>3,800<\/td><\/tr>
    Recommended Pressures
    for Both Gases (psi)<\/td>    		6<\/td><\/tr>
    Approximate Overall
    Flame Length<\/td>    		5.5 in.<\/td><\/tr>
    Brazing Capacity
    Copper Pipe<\/td>    		5\/16\u20135\/8 in.<\/td>\t\t\t\t<\/tr>\n\t\t\t<\/tbody>\n\t\t<\/table>\n\t\t\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\n\t\t\t\n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t
    Tip No. 6<\/th>\t\t\t\t<\/tr>\n\t\t\t<\/thead>\n\t\t\t\t\t\t
    Orifice Diameter<\/td>.037 in.<\/td><\/tr>
    Orifice Drill Size<\/td>63<\/td><\/tr>
    Btu\/Hour<\/td>6,585<\/td><\/tr>
    Recommended Pressures
    for Both Gases (psi)<\/td>    		6<\/td><\/tr>
    Approximate Overall
    Flame Length<\/td>    		6.5 in.<\/td><\/tr>
    Brazing Capacity
    Copper Pipe<\/td>    		3\/8\u20133\/4 in.<\/td>\t\t\t\t<\/tr>\n\t\t\t<\/tbody>\n\t\t<\/table>\n\t\t\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\n\t\t\t\n\t\t\t\t\n\t\t\t\t\t\n\t\t\t\t\n\t\t\t\t\t
    Tip No. 7<\/th>\t\t\t\t<\/tr>\n\t\t\t<\/thead>\n\t\t\t\t\t\t
    Orifice Diameter<\/td>.047 in.<\/td><\/tr>
    Orifice Drill Size<\/td>56<\/td><\/tr>
    Btu\/Hour<\/td>9,200<\/td><\/tr>
    Recommended Pressures
    for Both Gases (psi)<\/td>    		8<\/td><\/tr>
    Approximate Overall
    Flame Length<\/td>    		7 in.<\/td><\/tr>
    Brazing Capacity
    Copper Pipe<\/td>    		1\/2\u20137\/8 in.<\/td>\t\t\t\t<\/tr>\n\t\t\t<\/tbody>\n\t\t<\/table>\n\t\t\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    What are the\napplications for the\nmulti-flame heating\n(rosebud) tips?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    The rosebud tips may be used where a larger, more widely dispersed flame is needed for brazing, soldering or heating. They are used predominantly in the jeweler industry for annealing, reticulation and casting of gold or silver.<\/p>

    Both the acetylene and propane models can cast up to three ounces of gold and silver. These tips are also used for enameling and plastics polishing.<\/p>

    Note: Heating tips are not for use with disposable oxygen cylinders.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    What fuel gas\nwill work with the\nLittle Torch?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    The Little Torch may be operated with most commercially used welding gases including acetylene, propane, hydrogen and propylene. It may be used with city gas (natural gas) if the minimum pressure required for the tip is sufficient.<\/p>

    Caution: Most city gas lines only produce less than one psi.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Which fuel gas\nshould I use with\nmy Little Torch,\nacetylene or\npropane?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Most Little Torch operators use either acetylene or propane with each offering specific advantages and disadvantages.<\/p>

    Acetylene produces a very concentrated, pinpoint high-temperature flame (approximately 6,000\u00b0F) whereas the other gases tend to spread the head produced throughout the outer flame.<\/p>

    The acetylene flame produces soot during combustion and the propane gases tend to burn much cleaner. Acetylene gas is lighter than air and in the event of a gas leak it will tend to dissipate in the atmosphere with any air flow.<\/p>

    Propane gas is heavier than air and will fall to the floor and may collect in low spots thereby creating a potentially combustible hazard.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Can the gas valves\nbe replaced if they\nare damaged or\nworn out?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Yes. The complete torch valve assembly may be replaced for oxygen and fuel gas. Using an open-end wrench, remove the valve assembly from the torch body. There is a white packing ring (7348) under the valve that should be replaced. Green identifies the oxygen valve assembly (7345) and red identifies the fuel valve assembly (7346).<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Does my Little Torch\nrequire any adaptors\nto fit my cylinder\nregulators?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    For most regulators, adaptors are not required. The Little Torch hose assemblies have standard \u201cB\u201d 9\/16-inch welding hose connections and attach to most industrial welding gas regulators.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    Where can I use the Little Torch Caddy Kits\u2019 cylinders?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    Individuals using the cylinders inside should contact their insurance carriers and research fire codes for their locations.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t

    \n\t\t\t\t
    \n\t\t\t\t\t\t\t
    \n\t\t\t\n\t\t\t\t\t\t<\/span>\n\t\t<\/div>\n\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t

    How long will the\noxygen and fuel gas\nlast in disposable\ncylinders?<\/h3>\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t
    \n\t\t\t\t
    \n\t\t\t\t\t\t\t\t\t

    The Little Torch for Disposable Tanks Kit (23-1014) is available for use with disposable propane (or propylene) and oxygen cylinders. Disposable propane cylinders have 7.50 cfh of gas. Disposable oxygen cylinders have 1.05 cfh of gas.<\/p>

    This means that a No. 5 tip (12-1401-05) at 2.58 cfh propane and 3.1 cfh oxygen consumption would use up an oxygen cylinder in 20 minutes and a propane cylinder in three hours.<\/p>

    Note: Disposable oxygen and fuel cylinders may be purchased at your local hardware or gas distributors.<\/p>\t\t\t\t\t\t\t\t<\/div>\n\t\t\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t\t<\/div>\n\t\t<\/div>\n\t\t\t\t\t<\/div>\n\t\t<\/section>\n\t\t\t\t<\/div>\n\t\t","protected":false},"excerpt":{"rendered":"

    Temas generales \u00bfCu\u00e1l es la garant\u00eda de los productos Smith? Puede variar de un producto a otro. Consulte la pol\u00edtica de garant\u00eda de equipos de gas Smith. \u00bfPuedo cortar cualquier metal con Smith? No. El corte con oxicorte es solo para cortar acero dulce. \u00bfQu\u00e9 procesos puedo hacer con Smith? Puede cortar, soldar, brazing (soldadura […]<\/p>\n","protected":false},"author":1,"featured_media":0,"parent":0,"menu_order":1,"comment_status":"closed","ping_status":"closed","template":"elementor_header_footer","meta":{"_acf_changed":false,"content-type":"","ocean_front_end_style_editor":"no","ocean_post_layout":"","ocean_both_sidebars_style":"","ocean_both_sidebars_content_width":0,"ocean_both_sidebars_sidebars_width":0,"ocean_sidebar":"0","ocean_second_sidebar":"0","ocean_disable_margins":"enable","ocean_add_body_class":"","ocean_shortcode_before_top_bar":"","ocean_shortcode_after_top_bar":"","ocean_shortcode_before_header":"","ocean_shortcode_after_header":"","ocean_has_shortcode":"","ocean_shortcode_after_title":"","ocean_shortcode_before_footer_widgets":"","ocean_shortcode_after_footer_widgets":"","ocean_shortcode_before_footer_bottom":"","ocean_shortcode_after_footer_bottom":"","ocean_display_top_bar":"default","ocean_display_header":"default","ocean_header_style":"","ocean_center_header_left_menu":"0","ocean_custom_header_template":"0","ocean_custom_logo":0,"ocean_custom_retina_logo":0,"ocean_custom_logo_max_width":0,"ocean_custom_logo_tablet_max_width":0,"ocean_custom_logo_mobile_max_width":0,"ocean_custom_logo_max_height":0,"ocean_custom_logo_tablet_max_height":0,"ocean_custom_logo_mobile_max_height":0,"ocean_header_custom_menu":"0","ocean_menu_typo_font_family":"0","ocean_menu_typo_font_subset":"","ocean_menu_typo_font_size":0,"ocean_menu_typo_font_size_tablet":0,"ocean_menu_typo_font_size_mobile":0,"ocean_menu_typo_font_size_unit":"px","ocean_menu_typo_font_weight":"","ocean_menu_typo_font_weight_tablet":"","ocean_menu_typo_font_weight_mobile":"","ocean_menu_typo_transform":"","ocean_menu_typo_transform_tablet":"","ocean_menu_typo_transform_mobile":"","ocean_menu_typo_line_height":0,"ocean_menu_typo_line_height_tablet":0,"ocean_menu_typo_line_height_mobile":0,"ocean_menu_typo_line_height_unit":"","ocean_menu_typo_spacing":0,"ocean_menu_typo_spacing_tablet":0,"ocean_menu_typo_spacing_mobile":0,"ocean_menu_typo_spacing_unit":"","ocean_menu_link_color":"","ocean_menu_link_color_hover":"","ocean_menu_link_color_active":"","ocean_menu_link_background":"","ocean_menu_link_hover_background":"","ocean_menu_link_active_background":"","ocean_menu_social_links_bg":"","ocean_menu_social_hover_links_bg":"","ocean_menu_social_links_color":"","ocean_menu_social_hover_links_color":"","ocean_disable_title":"on","ocean_disable_heading":"default","ocean_post_title":"","ocean_post_subheading":"","ocean_post_title_style":"","ocean_post_title_background_color":"","ocean_post_title_background":0,"ocean_post_title_bg_image_position":"","ocean_post_title_bg_image_attachment":"","ocean_post_title_bg_image_repeat":"","ocean_post_title_bg_image_size":"","ocean_post_title_height":0,"ocean_post_title_bg_overlay":0.5,"ocean_post_title_bg_overlay_color":"","ocean_disable_breadcrumbs":"default","ocean_breadcrumbs_color":"","ocean_breadcrumbs_separator_color":"","ocean_breadcrumbs_links_color":"","ocean_breadcrumbs_links_hover_color":"","ocean_display_footer_widgets":"default","ocean_display_footer_bottom":"default","ocean_custom_footer_template":"0","_joinchat":[],"footnotes":""},"class_list":["post-93","page","type-page","status-publish","hentry","entry","owp-thumbs-layout-horizontal","owp-btn-normal","owp-tabs-layout-horizontal","has-no-thumbnails","has-product-nav"],"acf":[],"yoast_head":"\nPreguntas Frecuentes - Equipos de Oxicorte Smith<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.internationalgasequipment.com\/es\/preguntas-frecuentes\/\" \/>\n<meta property=\"og:locale\" content=\"es_ES\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Preguntas Frecuentes - Equipos de Oxicorte Smith\" \/>\n<meta property=\"og:description\" content=\"Temas generales \u00bfCu\u00e1l es la garant\u00eda de los productos Smith? Puede variar de un producto a otro. Consulte la pol\u00edtica de garant\u00eda de equipos de gas Smith. \u00bfPuedo cortar cualquier metal con Smith? No. El corte con oxicorte es solo para cortar acero dulce. \u00bfQu\u00e9 procesos puedo hacer con Smith? Puede cortar, soldar, brazing (soldadura […]\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.internationalgasequipment.com\/es\/preguntas-frecuentes\/\" \/>\n<meta property=\"og:site_name\" content=\"Equipos de Oxicorte Smith\" \/>\n<meta property=\"article:modified_time\" content=\"2025-05-08T12:09:55+00:00\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Tiempo de lectura\" \/>\n\t<meta name=\"twitter:data1\" content=\"6 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/preguntas-frecuentes\\\/\",\"url\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/preguntas-frecuentes\\\/\",\"name\":\"Preguntas Frecuentes - Equipos de Oxicorte Smith\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/#website\"},\"datePublished\":\"2021-05-18T21:37:06+00:00\",\"dateModified\":\"2025-05-08T12:09:55+00:00\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/preguntas-frecuentes\\\/#breadcrumb\"},\"inLanguage\":\"es\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/preguntas-frecuentes\\\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/preguntas-frecuentes\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Inicio\",\"item\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Preguntas Frecuentes\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/#website\",\"url\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/\",\"name\":\"Equipos de Oxicorte Smith\",\"description\":\"Distribuidores internacionales de equipos de oxicorte de alta calidad para soldadura, corte y calentamiento\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"es\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/#organization\",\"name\":\"International Gas Equipment\",\"url\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es\",\"@id\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/wp-content\\\/uploads\\\/sites\\\/2\\\/2021\\\/01\\\/ifexport-logo-308x80-1.png\",\"contentUrl\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/wp-content\\\/uploads\\\/sites\\\/2\\\/2021\\\/01\\\/ifexport-logo-308x80-1.png\",\"width\":308,\"height\":80,\"caption\":\"International Gas Equipment\"},\"image\":{\"@id\":\"https:\\\/\\\/www.internationalgasequipment.com\\\/es\\\/#\\\/schema\\\/logo\\\/image\\\/\"}}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Preguntas Frecuentes - Equipos de Oxicorte Smith","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.internationalgasequipment.com\/es\/preguntas-frecuentes\/","og_locale":"es_ES","og_type":"article","og_title":"Preguntas Frecuentes - Equipos de Oxicorte Smith","og_description":"Temas generales \u00bfCu\u00e1l es la garant\u00eda de los productos Smith? Puede variar de un producto a otro. Consulte la pol\u00edtica de garant\u00eda de equipos de gas Smith. \u00bfPuedo cortar cualquier metal con Smith? No. El corte con oxicorte es solo para cortar acero dulce. \u00bfQu\u00e9 procesos puedo hacer con Smith? Puede cortar, soldar, brazing (soldadura […]","og_url":"https:\/\/www.internationalgasequipment.com\/es\/preguntas-frecuentes\/","og_site_name":"Equipos de Oxicorte Smith","article_modified_time":"2025-05-08T12:09:55+00:00","twitter_card":"summary_large_image","twitter_misc":{"Tiempo de lectura":"6 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.internationalgasequipment.com\/es\/preguntas-frecuentes\/","url":"https:\/\/www.internationalgasequipment.com\/es\/preguntas-frecuentes\/","name":"Preguntas Frecuentes - Equipos de Oxicorte Smith","isPartOf":{"@id":"https:\/\/www.internationalgasequipment.com\/es\/#website"},"datePublished":"2021-05-18T21:37:06+00:00","dateModified":"2025-05-08T12:09:55+00:00","breadcrumb":{"@id":"https:\/\/www.internationalgasequipment.com\/es\/preguntas-frecuentes\/#breadcrumb"},"inLanguage":"es","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.internationalgasequipment.com\/es\/preguntas-frecuentes\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.internationalgasequipment.com\/es\/preguntas-frecuentes\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Inicio","item":"https:\/\/www.internationalgasequipment.com\/es\/"},{"@type":"ListItem","position":2,"name":"Preguntas Frecuentes"}]},{"@type":"WebSite","@id":"https:\/\/www.internationalgasequipment.com\/es\/#website","url":"https:\/\/www.internationalgasequipment.com\/es\/","name":"Equipos de Oxicorte Smith","description":"Distribuidores internacionales de equipos de oxicorte de alta calidad para soldadura, corte y calentamiento","publisher":{"@id":"https:\/\/www.internationalgasequipment.com\/es\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.internationalgasequipment.com\/es\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"es"},{"@type":"Organization","@id":"https:\/\/www.internationalgasequipment.com\/es\/#organization","name":"International Gas Equipment","url":"https:\/\/www.internationalgasequipment.com\/es\/","logo":{"@type":"ImageObject","inLanguage":"es","@id":"https:\/\/www.internationalgasequipment.com\/es\/#\/schema\/logo\/image\/","url":"https:\/\/www.internationalgasequipment.com\/es\/wp-content\/uploads\/sites\/2\/2021\/01\/ifexport-logo-308x80-1.png","contentUrl":"https:\/\/www.internationalgasequipment.com\/es\/wp-content\/uploads\/sites\/2\/2021\/01\/ifexport-logo-308x80-1.png","width":308,"height":80,"caption":"International Gas Equipment"},"image":{"@id":"https:\/\/www.internationalgasequipment.com\/es\/#\/schema\/logo\/image\/"}}]}},"_links":{"self":[{"href":"https:\/\/www.internationalgasequipment.com\/es\/wp-json\/wp\/v2\/pages\/93","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.internationalgasequipment.com\/es\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/www.internationalgasequipment.com\/es\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/www.internationalgasequipment.com\/es\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.internationalgasequipment.com\/es\/wp-json\/wp\/v2\/comments?post=93"}],"version-history":[{"count":3,"href":"https:\/\/www.internationalgasequipment.com\/es\/wp-json\/wp\/v2\/pages\/93\/revisions"}],"predecessor-version":[{"id":7778,"href":"https:\/\/www.internationalgasequipment.com\/es\/wp-json\/wp\/v2\/pages\/93\/revisions\/7778"}],"wp:attachment":[{"href":"https:\/\/www.internationalgasequipment.com\/es\/wp-json\/wp\/v2\/media?parent=93"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}